Malla Cinegética MálagaGame, livestock & finca fencing
Game fencing on timber posts with diagonal braces across grassland
Posts and bracing

Timber, concrete or steel posts for rural fencing

The posts decide whether a rural fence stays tight or slowly leans over. We set timber, precast concrete and steel posts on fincas across Málaga province, choosing them for the ground in front of us.

Rural fence posts are the vertical supports – treated timber, precast concrete or steel – that hold mesh and straining wires at height; strainer posts with bracing at corners and ends carry the tension, while intermediate posts keep the line straight and follow the ground.

What jobs do the posts actually do?

In short: strainer posts at corners and ends carry the tension of the mesh; intermediate posts keep it at height and follow the ground – they need different strength.

A tensioned mesh fence pulls hard on its ends. That load goes into the strainer posts at every corner, end and sharp change of direction, and from there into the ground through a diagonal brace or a horizontal brace with a tie. These assemblies are the skeleton of the fence; if one moves, the mesh slackens all the way to the next one.

Intermediate posts carry much less load. They hold the mesh at height, keep the line straight and pull the bottom wire down into hollows. That is why it often makes sense to use a heavier, more expensive post at the assemblies and a lighter one in between. The photo on this page shows exactly that: timber posts with diagonal braces at a strainer point across open grassland.

Game fencing on timber posts with diagonal braces across grassland
Game fencing on timber posts with diagonal braces across grassland

When are timber posts the right choice?

In short: treated timber is versatile, easy to brace and pleasant to look at in the countryside; it suits most soils that can be dug or driven.

Pressure-treated round or sawn timber is the traditional rural post. It is easy to cut to length on site, it takes staples well and braces can be notched and fixed with ordinary tools. It looks at home among olive trees and pasture, which matters to many finca owners.

Timber is less suited to very wet spots and to ground where termites or rot are known problems; in those places we may suggest a different post for the worst stretches. We do not quote lifespans – treatment, soil and moisture all play a part – but we will tell you where we expect timber to suffer and why.

Stock fence with a braced timber post
Stock fence with a braced timber post

When do precast concrete posts make sense?

In short: concrete posts do not rot and suit damp or termite-prone ground, but they are heavy and need care at the assemblies.

Precast concrete posts are common in Spain for rural mesh fences, especially knotted game mesh. They are stiff, they do not rot and they suit ground where timber would suffer. The trade-offs are weight – which affects access and handling on steep land – and the fact that they are less forgiving to fix to than timber. Concrete strainer posts need properly designed braces and footings.

The photo of knotted mesh on concrete posts across open pasture on our knotted field fence page shows a typical result. On many lines we combine concrete assemblies with other intermediates, depending on the ground.

Knotted game fence on concrete posts across open pasture
Knotted game fence on concrete posts across open pasture

What about steel posts?

In short: steel posts are light, slim and can be driven into many soils; they are useful on long runs and stony ground but need suitable fixings for the mesh.

Galvanised steel posts – angle, tube or profiled sections – are light to carry and quick to place. In ground that allows it they can be driven rather than dug, which speeds up long runs. They are a good intermediate on many lines, and in heavier sections they can also be used at assemblies with the right bracing.

Steel needs clips or ties rather than staples to hold the mesh, and on very rocky ground it may still need drilling or a concrete footing. The article fence posts for rough ground goes through how we choose between the three materials on typical inland terrain, and common mistakes when choosing rural fencing explains why under-specified posts are the most expensive saving you can make.

How are posts set in rocky, clay or loose ground?

In short: they are dug and concreted, driven or set in drilled rock, depending on the soil; the assemblies always get the most solid fixing.

There is no single method. In firm soil that can be driven, driving gives a tight post with little disturbance. In loose or crumbly soil, posts are dug and set in a concrete footing. On rock, we may need to drill or break the surface to get a post down far enough. Clay that turns soft in winter needs extra attention at the assemblies, because it can let a strainer post creep.

We decide the method after walking the line and, if needed, opening a test hole. We do not give fixed depths or footing sizes from a table; they follow the ground and the load. Good setting out comes first – see clearing and setting out.

Worker digging a post hole on the set-out line
Worker digging a post hole on the set-out line

What changes the cost of a post?

In short: material, size, number of assemblies, how the post is fixed in the ground and how hard it is to bring material to the line.

A post's price is only the start. The way it goes into the ground often costs more than the post itself, especially on rock. Heavy concrete posts on a steep site with no vehicle access cost more to place than the same posts beside a track. The factors below are the ones we price separately. For the wider picture, see how fence quotes are built.

BR
Bauman Raymond Attila
Author and person responsible · Last reviewed:
How we build it – step by step

How we build it – step by step

  1. Assess the ground

    We walk the line and look at soil, rock, moisture and slope, and open a test hole where needed.

  2. Plan assemblies

    We mark every corner, end and change of direction where a braced strainer assembly is needed.

  3. Set out the line

    The route is staked so that post positions can be marked along it.

  4. Dig, drill or drive

    Each post position is prepared with the method that suits the ground at that point.

  5. Set strainer posts and braces

    Strainer posts are fixed first, with braces and ties, and given time to set where concrete is used.

  6. Set intermediates

    Intermediate posts are placed in line and at the agreed height and spacing.

  7. Check alignment

    We sight along the line and adjust any post out of line before the mesh goes on.

  8. Mesh, tension and clean-up

    Mesh and wires are fixed and tensioned, and the site is left tidy.

When is it the right choice – and when not?

When is it the right choice – and when not?

A good fit if…

  • Choosing posts for a new game, livestock or boundary fence
  • Replacing failed posts on an otherwise sound line
  • Mixed terrain where different stretches need different posts
  • Owners who want to understand what they are paying for

Consider another option if…

  • Posts as part of a retaining structure – a fence is not a retaining wall
  • Structural work that needs calculations by an engineer
  • Supplying posts without installation – we are not a shop
  • Garden fences where a panel or slat system is more suitable
What affects the cost?

What affects the cost?

We don't publish fixed prices: every fence is quoted line by line using these factors.

  • Post material: timber, concrete or steel
  • Post size and length
  • Number of strainer assemblies and braces
  • Fixing method: driven, dug and concreted, drilled in rock
  • Spacing of intermediates
  • Slope and ground conditions
  • Access for heavy material

Fence cost calculator See how a fence quote is put together

Itemised quoteItemisedquoteLinear metresHeightPanel typeLow wall or notFoundationsGround & slopeAccessOld fence removalClearingPermit
Our specialist sites by fence type
Keep reading

Articles and guides

Stock fencing on timber posts on a hillside

Livestock fencing for sheep, goats, horses and cattle

A stock fence has one job: keep your animals where you want them, every day, without injuring them. We build livestock fencing on fincas across Málaga province, matched to the animal and the ground.

View details →
Knotted field fence with a concrete post, close view

Knotted field fence for fincas and rural land

Knotted mesh is the workhorse of rural fencing: the wires are locked together at every crossing, so the fence keeps its shape when animals push against it. We install it on fincas and estates across Málaga province.

View details →
Fence line cleared of scrub in woodland

Clearing and setting out the fence line

A rural fence is only as good as the line it stands on. Before any post goes in, we clear the route and mark it with stakes – always as part of building your fence, never as a separate land-clearing service.

View details →
Stock fence with a braced timber post
Blog

Timber vs concrete vs steel posts on rough ground

On a showroom floor the choice between timber, concrete and steel posts looks like a matter of taste. On a rocky hillside in inland Málaga it is a matter of what the ground will let you do.

View details →
Old post on the cleared fence line
Blog

Common mistakes when choosing rural fencing

Most failed rural fences we are asked to replace were not badly built by accident. They were badly chosen. These are the mistakes that come up again and again.

View details →
Setting out the fence line with stakes in woodland
Technical guides

Fencing rustic land in Andalucía: what to check first

Most fincas in inland Málaga sit on rustic land. Before you fence one, it helps to understand who decides what paperwork you need and which other rules can apply to the same line.

View details →
FAQ

Frequently asked questions

Which post lasts longest?

It depends on the soil, moisture and how the post is used. We do not quote lifespans, but we will explain where each material is likely to suffer on your ground.

Can I mix post types on one fence?

Yes, and it is often sensible: heavier posts at corners and ends, lighter intermediates in between.

Are concrete posts better than timber?

Not automatically. Concrete does not rot and suits damp ground, but it is heavy and needs well-designed bracing. Timber is easier to work and brace.

Can steel posts be driven into rocky ground?

Sometimes, if the rock is broken. On solid rock we may need to drill or use a footing.

How deep do posts go?

That depends on the soil, the post and the load. We decide after seeing the ground and do not use a fixed figure.

What is a strainer assembly?

A heavy post at a corner or end with a brace that transfers the pull of the tensioned mesh into the ground. It is what keeps the fence tight.

Can you replace only the posts on my old fence?

If the mesh is still sound, sometimes yes. Often the assemblies are the problem and replacing them restores tension.

Do you supply posts on their own?

No. We are a contractor; posts are part of the fence we install.

Can I use my own posts?

Yes, if they suit the job. We check them before using them.

Do posts need concrete?

Not always. Driven posts in firm soil can be very tight. Assemblies and loose ground usually benefit from concrete.

Get a quote

Send photos and the approximate length

We look at the line, suggest the fence that fits and prepare an itemised quote with no commitment. WhatsApp 613 656 443 or the contact form.